All Teflon/FEP Part Mean Absolutely
No Contamination. Recent studies have proven that stainless
steel can leach oxides into ultrapure water. Shivsu Canadian Clear eliminate oxides and other contaminants in ultrapure
water by using only Teflon and FEP as parts which contact
water. Many years of field experience have shown Teflon
and FEP, both fluorocarbon materials, to be the most reliable,
inert and tough man-made materials.The excellent UV Sterilizer
transmission characteristics of Teflon contain a higher
UV field which results in a better kill of microorganisms.
99.9+% Destruction of Microorganisms
:
As reported at a recent meeting of the American institute
of Chemical Engineers, Teflon tubes contain a higher UV
energy field than quartz. Teflon's higher energy field
results in a higher kill rate.
A special water flow pattern through the Teflon tubes
assures turbulence and full exposure to the UV rays. High
turbulence and non wetting surface characteristics of
Teflon also eliminate any buildup of contaminants that
could block our UV rays.
High Reliability And Low Maintenance
:
Shivsu Canadian Clear contains no moving parts. Since there is no contaminant
buildup on Teflon /FEP parts, no wipers or chemical additive
systems are necessary. The snap-in UV bulbs are easily
replaced without having to stop the water flow through
the system. This feature eliminates the possibility of
contaminating the high purity loop during normal maintenance.
Separation of fluid circuitry from electrical circuitry
allows the UV lamps to operate continuously even without
water. This also allows the UV lamps to operate at their
optimum operating temperature (110 F) so they can produce
optimum UV light. Continuous operation of UV lamps assures
longer bulb life and lower replacement cost.
We have a System For you :
Whatever your ultrapure water needs, Shivsu Canadian Clear,
has the system. Standard models range from 1 to 600 gpm.
Custom models are also available. |
